Guides
Beyond smart yard case studies: a home irrigation workflow
Go beyond smart yard case studies with a home irrigation workflow adapted from EPA guidance: plan, meter, repair, install, verify, then monitor.
Section
Guides
Guides
Documenting a smart yard project: the record that lets results be checked later
How to document a smart yard project, such as an irrigation controller, soil sensors or a robot mower: set a baseline, record the intervention and site factors, note confounders, and keep figures that can be checked.
Guides
Outdoor lighting controls: A five-stage planning checklist
Use this five-stage outdoor lighting controls checklist to match yard tasks with schedules, wiring routes, spill limits, hours of use, and service terms.
Guides
How Canadian frost dates set smart irrigation schedules in Ontario and Alberta
Canadian frost dates from local stations, not the calendar, should switch a sprinkler on and off for smart irrigation in Ontario and Alberta.
Guides
Dark Sky Compliant Smart Outdoor Lighting: What to Check
Dark sky compliant smart outdoor lighting starts with shielding, 3000K or lower color, and curfew controls. Compare four approaches, named fixtures, controls.
Guides
Garden Sensors for Canadian Climates: What Actually Survives
Which garden sensors survive a Canadian winter, which brands actually hold up, and what to pull out of the vegetable bed before the first hard frost.
Guides
Robotic Lawn Mower for Steep Slopes: What to Look For
A robotic lawn mower for steep slopes needs the right grade rating and traction. Compare traction, navigation and stated grade before buying.
Guides
Smart Outdoor Lighting Transformer: What to Check Before Buying
Smart outdoor lighting transformer buying comes down to UL listing, voltage taps and load headroom. Here is what to check before you order one.
Guides
Soil Moisture Sensor vs Tensiometer: Which One for Clay?
Soil moisture sensor vs tensiometer in clay: what each instrument measures, where calibration breaks down, and which one earns a place in a scheduling plan.
Guides
Yard Technology Mistakes: Five Site Checks
Yard technology mistakes can start before installation. Five site checks cover utility locates, tree roots, backflow, septic areas, and handover.
Guides
Yard technology mistakes: planning for water and faults
Plan around yard technology mistakes by tracing runoff, checking source-water risks, designing visible fault warnings, and keeping a useful site record.
Guides
An honest review of robotic yard equipment
Robotic mowers, their real strengths and limits, and the site measurements and lawn slope data that decide whether any of them suits your yard.
Guides
4 Pointers for Robotic Yard Equipment on Lawns
A practical guide to robotic yard equipment for lawns: measure the site, compare mower types, read coverage estimates, and plan installation and operation.
Guides
Outdoor automation ideas: 5 checks before you buy
Use these five checks to evaluate outdoor automation ideas before buying: define the job, test the site, verify standards, confirm support, and decide.
Guides
Smart irrigation planning: measure demand, hydrozone, then set run times
A step by step smart irrigation plan: measure how much water the planting needs, group plants by demand, fix hardware, then automate the schedule.
Guides
Phasing a smart yard: what to install now, and what waits
Phase a smart yard so each season informs the next: what to install while the trench is open, which controllers and sensors wait, and how rebate windows fit.
Guides
Planning a smart yard setup: keeping room for expansion later
Plan a smart yard setup that survives expansion: site data first, pressure and pipe capacity, spare conduit and wire, and control that is not locked to one vendor.
Guides
Reading smart yard technology with a sceptical eye, 2027 edition
How smart yard technology is organized in 2027: controller types, the standards behind the labels, where savings figures come from, and what stays local.
Guides
Smart Irrigation Installation: What the Work Includes
Smart yard installation, item by item: access, trenching, buried materials, controller and sensor setup, programming, restoration, design time and allowances.
Guides
Hidden costs behind installing yard automation gear at a property
The real work behind a smart yard install: the pre-install audit, pressure and coverage fixes, wiring and backflow, and how to check a contractor's certification.